Back to the product list
ReliaDrain Zero-Loss Condensate Removal
The ReliaDrain™ is an electrically-powered zero-loss condensate removal solution. It uses capacitive sensors to determine when the drain reservoir is full and open the drain valve. The ReliaDrain maintains a minimum liquid level within the reservoir to ensure that only condensate is removed from the system and that no process air escapes through the drain orifice.
Share
Features
- Condensate enters the inlet opening.
- Condensate accumulates in the reservoir.
- Diaphragm valve is held closed by pressure of pilot supply line.
- Solenoid valve in retracted position.
- Leak-proof seal created between accumulation chamber and discharge pipe.
- Capacitive sensor signals when condensate reaches maximum level (closes when condensate decreases to minimum level)
- Solenoid valve is energized and the area above the diaphragm is vented.
- Diaphragm valve opens and drains condensate into the discharge pipe
Model Specifications
Model
CFM Rating
PSI Rating
ReliaDrain 2000
up to 2000
12 - 230
ReliaDrain 3000
up to 8000
12 - 230
ReliaDrain 6000
up to 80
000
Parts and Accessories
- Condensate enters the inlet opening.
- Condensate accumulates in the reservoir.
- Diaphragm valve is held closed by pressure of pilot supply line.
- Solenoid valve in retracted position.
- Leak-proof seal created between accumulation chamber and discharge pipe.
- Capacitive sensor signals when condensate reaches maximum level (closes when condensate decreases to minimum level)
- Solenoid valve is energized and the area above the diaphragm is vented.
- Diaphragm valve opens and drains condensate into the discharge pipe
Model
CFM Rating
PSI Rating
ReliaDrain 2000
up to 2000
12 - 230
ReliaDrain 3000
up to 8000
12 - 230
ReliaDrain 6000
up to 80
000