How can we help you?

image
Click to enlarge
Back to the product list

IntelliFlow Electronic Flow Controller

圧縮空気システムを運転するために使用されるエネルギーの20%から60%も無駄になっています! この無駄の主な原因は高圧力で空気システムを運転することです。 圧縮空気の高圧力ストレージは、急激に大量の需要が集中すると静電容量効果を生起しやすいことは、あまり知られていません。 あまり知られていないことですが、高圧力のストレージは、正しく制御し管理されないと、圧縮に追加エネルギーを要してより高圧を要するようになるのみではなく(0.5%のエネルギーが1%の圧力増分毎に発生する等)、全ての圧縮空気使用部からさらに高い空気消費を要するようになります(場合によっては最大12%余計に必要となります)! インガソール・ランドのインテリフロー制御を応用しますと、効果的にシステムストレージを用いて大量の、ランダムな空気使用をカバーでき、さらにシステム全体の圧力を高める必要がなくなります。 同様に、インテリフロー制御もコンプレッサが、ランダムな空気使用に起因する起動または短周期のために、負荷運転する必要が無くなります。

特長

 

Balancing Pressure Supply and Demand

Pressure instability, even a one-time pressure drop, frequently causes operators to elevate air pressure. But this fix also increases the air consumption of all poorly regulated processes…including the leak rate! For example, in a nominal 100 psig air system, a 15 psig increase in pressure will use approximately 10-12% more compressed air, PLUS use 7.5% more energy to compress. Installing an IntelliFlow controller, combined with proper storage and control, will provide a capacitance (stored energy) effect for sudden high volume system demands, eliminating the energy and maintenance costs associated with elevating the pressure… and adding profit to the bottom line!

The IntelliFlow constantly monitors the demand of air pressure and dynamically adjusts to utilize storage, increase volume
flow and stabilize pressure as needed (A).

IntelliFlow can also prioritize and protect critical processes or zones in the air system. Many systems have pressure critical processes, which can stop working or create waste if the pressure drops below a minimum level. IntelliFlow’s backpressure control (B) ensures the proper pressure prioritization to prevent this problem.

In addition, IntelliFlow’s “Combination Control” automatically switches control between forward system control and
backpressure priority control (C) based on user defined set points.

Features:

  • High capacity, low pressure drop
  • 3-valve manual bypass with fittings
  • Forward, backpressure and combination control
  • Electronic control (standard)
  • Mounted c-UL NEMA 12 panel
  • Multiple pressure set points
  • Auxiliary contacts
  • Mounted dual pressure sensors
  • Network communication ready
  • X-Series visualization ready
  • Complete mounted & wired assembly

 

モデル仕様

Model
CCN
Connection Size In/Out (in)
Flow scfm min
Flow scfm max
Lenth (in)
Width (in)
Height (in)
Weight (lb)
IX-02
# 23473192
2
207
835
39.25
15
33.87
180
IX-03
# 23473200
3
580
2664
43.87
16.62
38.5
250
IX-04
# 23473218
4
1077
4868
58.5
18.06
44.35
440
IX-06
# 23473226
6
2320
10700
64.5
20.43
51.25
650
IX-08
# 23473234
8
4144
19200
70.68
70.68
53.06
860
IX-08CDN*
# 23485980
8
4144
19200
70.68
70.68
53.06
860

 

Balancing Pressure Supply and Demand

Pressure instability, even a one-time pressure drop, frequently causes operators to elevate air pressure. But this fix also increases the air consumption of all poorly regulated processes…including the leak rate! For example, in a nominal 100 psig air system, a 15 psig increase in pressure will use approximately 10-12% more compressed air, PLUS use 7.5% more energy to compress. Installing an IntelliFlow controller, combined with proper storage and control, will provide a capacitance (stored energy) effect for sudden high volume system demands, eliminating the energy and maintenance costs associated with elevating the pressure… and adding profit to the bottom line!

The IntelliFlow constantly monitors the demand of air pressure and dynamically adjusts to utilize storage, increase volume
flow and stabilize pressure as needed (A).

IntelliFlow can also prioritize and protect critical processes or zones in the air system. Many systems have pressure critical processes, which can stop working or create waste if the pressure drops below a minimum level. IntelliFlow’s backpressure control (B) ensures the proper pressure prioritization to prevent this problem.

In addition, IntelliFlow’s “Combination Control” automatically switches control between forward system control and
backpressure priority control (C) based on user defined set points.

Features:

  • High capacity, low pressure drop
  • 3-valve manual bypass with fittings
  • Forward, backpressure and combination control
  • Electronic control (standard)
  • Mounted c-UL NEMA 12 panel
  • Multiple pressure set points
  • Auxiliary contacts
  • Mounted dual pressure sensors
  • Network communication ready
  • X-Series visualization ready
  • Complete mounted & wired assembly

 

Model
CCN
Connection Size In/Out (in)
Flow scfm min
Flow scfm max
Lenth (in)
Width (in)
Height (in)
Weight (lb)
IX-02
# 23473192
2
207
835
39.25
15
33.87
180
IX-03
# 23473200
3
580
2664
43.87
16.62
38.5
250
IX-04
# 23473218
4
1077
4868
58.5
18.06
44.35
440
IX-06
# 23473226
6
2320
10700
64.5
20.43
51.25
650
IX-08
# 23473234
8
4144
19200
70.68
70.68
53.06
860
IX-08CDN*
# 23485980
8
4144
19200
70.68
70.68
53.06
860